Selectronic SP PRO 2i Series, Инструкция по эксплуатации

Страница: 93 / 113

SP LINK | Service Settings
Doc #OI0005 Rev26 2020
|
93
Time and date
To ensure that various timed functions within the SP PRO, such
as generator run schedules, perform as expected it is important
to have the correct date and time recorded in the SP PRO. You
have the option of automatically uploading the time and date from
the computer – including the facility to allow for an offset if the
computer is set to a different time zone to the area of installation –
or to manually set the time and date.
If you are adjusting the date manually click on the circle adjacent
to MANUALLY SET DATE / TIME and use the drop down menu
to select the correct date. The time can be set by clicking on the
hour or minute section and use the up/down arrows to adjust.
When you have completed adjustment click on SET SP PRO
TIME to record the change.
Battery SoC
When first setting up the SP PRO an initial estimation of the state of charge must be
programmed to enable the SP PRO to facilitate all the functions that are determined
by the state of charge measurement from the first day. As the period of operation
increases any small error from the original estimation will be corrected. This function is
not used when the SP PRO is communicating with a battery as the SoC is read directly
from the BMS.
Login Password
The Login Password is only used when connecting to the SP PRO. A separate
password is used to change configuration settings (Settings Password).
If you are concerned that the default login password does not provide the level of
security for any access to the SP PRO, you can change the Login Password in the
SP PRO to one that is uniquely yours.
Like the Settings Passcode, if the Login Password is lost or forgotten it can only be
reset by a procedure that requires someone to be on site.
SP LINK will automatically update the Connection settings in Site Information when you
set the new Login Password.
Settings Passcode
The Settings Passcode is only used to change configuration settings within the
SP PRO. A separate passcode (Login Passcode) is used to connect to the SP PRO.
If you are concerned that the standard Settings Passcode does not provide the
level of security you desire for changing settings, you can change the passcode in the
SP PRO to one that is uniquely yours.
Please note that if this Settings Passcode is lost or forgotten it can only be
reset by a procedure that requires someone to be on site.
If you require assistance resetting the passcode please consult an Accredited
Integrator.