Selectronic SP PRO 2i Series Скачать руководство пользователя страница 27

Страница: 27 / 113

SP LINK | Using SP LINK

Doc #OI0005 Rev26 2020

Firmware Update

SP LINK provides a convenient and simple way to update the firmware in the SP PRO inverter. This only needs

to be performed if you have been specifically requested to update the firmware which can be done either on-site

or remotely.

Before updating firmware make sure you have the latest version of SP LINK, available at

www.selectronic.com.au

which contains the most recently released firmware.

SAVE CURRENT CONFIGURATION

If you are updating an existing system then it is recommended that the configuration settings within the SP PRO

be saved to file before updating firmware:

Connect to the SP PRO.

Select the Configuration Settings tab.

Click the Get SP PRO’s Configuration button.

Save Configuration settings. (File > Configuration Settings > Save)

SET STRING INVERTER

If the system is using or will use Managed AC Coupling with a Selectronic Certified grid inverter then it is

important to set the

String Inverter

setting and configure the SP PRO before Firmware Update. Once this is

done the Firmware update process will automatically selected the compatible firmware

See String Inverter on page 59.

FIRMWARE UPDATE PROCESS

Select File > Firmware Update and the SP PRO Basic

Firmware Update window will appear and show the Current

and the New SP PRO Firmware Information.

Update Firmware and restart SP PRO on Conclusion:

Use this option to update the firmware in the SP PRO to

the firmware version that is included in SP LINK. If you are

using the latest SP LINK then this will be the latest firmware.

Once the update is competed and the SP PRO has

restarted, this window will close. You are now able to

connect to the SP PRO.

Содержание SP PRO 2i Series


















































































































Результаты поиска

Содержание SP PRO 2i Series

Отзывы:

Похожие инструкции для SP PRO 2i Series

Бренды по названию

Популярные бренды

Selectronic SP PRO 2i Series, Инструкция по эксплуатации

Результаты поиска

Содержание SP PRO 2i Series

Отзывы:

Похожие инструкции для SP PRO 2i Series

Бренды по названию

Популярные бренды