Sedecal SPL-HF 2.0, Руководство по обслуживанию

Страница: 58 / 222

Portable X-ray Units
Service Manual
SM-1076R2
48
ERROR CODE : E04
DESCRIPTION
: The “ Fluoro ” order input signal is active during the Start-up sequence.
“Unrecoverable”, the system remains lock.
POSIBLE CAUSES
The “ Fluoro ” order input signal is active and/or defective hardware related to this input.
ACTIONS
1. Make sure that the “ Fluoro ” order input signal in J11.5 of the Portable Control
Board ( A3175--03 ) is inactive during the Start-up.
2. Verify the possible defective hardware related to this input.
3. Deactivate the input or replace the defective hardware.
ERROR CODE : E05
DESCRIPTION
: “ Exposure ” order input signal is active during the Start-up sequence.
“Unrecoverable”, the system remains lock.
POSIBLE CAUSES
The microprocessor has detected “ Exposure ” during the Start-up sequence.
ACTIONS
1. Make sure that the “ Exposure ” order is inactive during the Start-up by first
checking the Handswitch control and Console Overlay.
2. Make sure that the “ Exposure ” order is inactive during the Start-up by checking
the signal in:
G
connector J6.2, J8.4, J12.5 and J13.2 on Portable Control Board
(
A3175--03 ).
G
connector J2.3 (Handswitch) and J1.8 (RS--232) of the Portable Unit.
G
overlay ribbon cables signal connected to J13.2 on Portable Control
Board (
A3175--03 ).
G
connector J4.3 on the Remote Console Connectors ( A3632--02 ) (only for
Portable Units with Trolley).
3. Verify the possible defective hardware related to these inputs.
4. Deactivate the input or replace the defective hardware.