Sedecal SPL-HF 2.0, Руководство по обслуживанию

Страница: 141 / 222

Portable X-ray Units
Service Manual
SM-1076R2 131
6. Once the components in the Central Support have been replaced,
replace the Tie Wrap previously removed.
7. Screw the Protecting Plate to the Central Support and Assemble it to HV
Transformer.
8. Assemble the Upper and Lower Covers.
5.4.14.2 CIRCUIT BREAKER
1. Access inside the Central Support as described in Section 5.4.14.1.
2. Remove the old Circuit Breaker as described in Section 5.3.16.2 (steps
2. to 5. ).
3. Replace the Circuit Breaker, reconnect in reverse order and assemble
the Power Unit as described in
Section 5.4.14.1 .
5.4.14.3 EMC INPUT FILTER BOARD
1. Access inside the Central Support as described in Section 5.4.14.1.
2. Replace the EMC Input Filter Board as described in Section 5.3.16.4
(steps 2. to 12.).
3. Assemble the Power Unit as described in Section 5.4.14.1 .
5.4.14.4 INDUCTANCE CHOPPER
1. Access inside the Central Support as described in Section 5.4.14.1.
2. Replace the Inductance Chopper as described in Section 5.3.16.5 (steps
2. to 7.).
3. Assemble the Power Unit as described in Section 5.4.14.1 .
5.4.14.5 POWER SUPPLY
1. Access inside the Central Support as described in Section 5.4.14.1.
2. Replace the Power Supply as described in Section 5.3.16.6 (steps 2. to
4.).
3. Assemble the Power Unit as described in Section 5.4.14.1 .