Sedecal SPL-HF 2.0, Руководство по обслуживанию

Страница: 17 / 222

Portable X-ray Units
Service Manual
SM-1076R2 7
Table 2-1 (cont.)
Configuration Menus
Value on kVp Display DESCRIPTION
NOTES
TIME CONFIGURATION FOR “PREP” AND COLLIMATOR LIGHT Refer to Section 2.2.4
C05
C5.1
“Prep” Time Configuration:
10 - 50 seconds
Factory Configured at 30 seconds.
C5.2
“Collimator Light” Time Configuration:
10 - 50 seconds
Factory Configured at 30 seconds.
MAXIMUM X-RAY TUBE POWER Refer to Section 2.2.5
C06
C6.1 Maximum percentage limit for X-Ray Tube
Select the maximum power percentage
at 100, 90, 80 or 70.
MISCELLANEOUS
Refer to Section 2.2.6
C7.1 Speaker Sound: OFF / ON
OFF: all sounds disabled except for Exp.
ON: all sounds enabled (factory set)
.
C07
C7.2
Winter / Summer Automatic Time Update:
NO / YES
NO: automatic time update disabled.
YES: automatic time update enabled
(factory set).
C7.3 Collimator Light ON with PREP: OFF / ON
OFF: Collimator Light only enable with button
(factory set).
ON: Collimator Light enable when pressing
“
PREP ”.
DATE AND TIME
Factory set at GMT +1.Refer to Section 2.2.7
C8.1 Hour
0 - 23
C08
C8.2 Minutes
0 - 59
C08
C8.3 Date
1 - 31
C8.4 Month
1 - 12
C8.5 Year 2000 - 2099
If any of the configurated values is not consistent with the Unit
Parameters, the system will not allow to exit from Configuration
mode. Double check the configured values (Refer to Table 2-1).
Note
.