Sedecal SPL-HF 2.0, Руководство по обслуживанию

Страница: 16 / 222

Portable X-ray Units
Service Manual
SM-1076R2
6
Table 2-1
Configuration Menus
Value on kVp Display DESCRIPTION
NOTES
WORKSTATION-1 CONFIGURATION
C1.1
X-ray Tube present
0 = WS not used, 1 = Tube 1
C01
C1.2
Workstation Type:
0 = Direct, 1 = Bucky / Detector,
2 = not used
Values factory set.
Original values must not be modified.
Refer to Section 2.2.1
C1.3
Device selection:
0 = none, 1 = Bucky / Detector input
C1.4 0 = not used
WORKSTATION-2 CONFIGURATION
C2.1
X-ray Tube present
0 = WS not used, 1= Tube 1
C02
C2.2
Workstation Type:
0 = Direct, 1 = Bucky / Detector,
2 = not used
Values factory set.
Original values must not be modified.
Refer to Section 2.2.1
C2.3
Device selection:
0 = none, 1 = Bucky / Detector input
C2.4 0 = not used
mA STATION CONFIGURATION FOR EACH FOCUS
Refer to Section 2.2.2
C03
C3.1
mA Stations for “Small Focal Spot”:
5.000 mA - 100.0 mA
(for 2 kW unit mA Station are limited)
Set Maximum mA station for “Small Focal Spot”
C3.2
mA Stations for “Large Focal Spot” :
5.000 mA - 100.0 mA
(for 2 kW unit mA Station are limited)
Set Minimum mA Station for “Large Focal Spot”
X-RAY TUBE LIST SELECTION / number of Tube in the list
C4 1
X-ray Tube Configuration as Tube--1:
C04
C4.1
X-ray Tube Configuration as Tube--1:
1 - 9
Refer to Section 2.2.3
C4.2
X-ray Tube Configuration as Tube--2:
not used