Sedecal SPL-HF 2.0, Руководство по обслуживанию

Страница: 18 / 222

Portable X-ray Units
Service Manual
SM-1076R2
8
2.2.1 CONFIGURATION OF WORKSTATIONS (1) -- (2)
To select Workstation 1 press the “ Direct ” Workstation push-button, to select
Workstation 2 press the “ Receptor ” (Bucky or Digital Detector) Workstation
push-button.
In case the Receptor Workstation for the Digital Detector or Bucky
is selected and no Digital Detector or Bucky is connected to the
Unit or the connection is malfunctioning, error code “E24” appears
on the Display. Press “Reset” push-button and check connections
and signals of the Digital Detector or Bucky, or select the
Workstation for Direct if no Receptor is needed.
Factory Setting
Workstation 1
Direct
Workstation 2
Bucky or Detector
Workstation 1 or 2
if not Bucky or Detector
C 1.1 1 C 2.1 1
C 1.2 0 C 2.2
1
Set all values 0
C 1.3 0 C 2.3
1
Set all values 0
C 1.4 0 C 2.4 0
In case a Workstation configuration needs to be modified:
1. Enter Configuration Menu C01 (for Workstation-1) or C02 (for
Workstation-2).
2. Enter sub-menu C1.X or C2.X, the kVp Display shows (C1.X) or (C2.X)
and the mAs Display shows the selectable values.
As example, enter sub-menu C1.1 or C2.1. The kVp Display shows
(C1.1) or (C2.1) and the mAs Display shows (0) or (1). “X-ray Tube
present” value is “
0 ” for Workstation not used or “ 1 ” for X-ray Tube--1
present (Workstation used).
3. Press “mAs Increase” to change the corresponding value from a.e. “ 0 ”
(Workstation not used) to “ 1 ” (Tube present -- Workstation used) or
viceversa.
4. Press “Reset” push-button to save value.
Note
.