Sanken Samco SVC06, Инструкция по эксплуатации, Страница: 66 / 136

- 64 -
5-6 Connecting operation panel with extension cable
5-6 Connecting operation panel with extension cable
If the operation panel is connected to inverter with the extension cable, then the operation panel can be installed in
other instrument frame. (See Chapter 12: outside view of 12-2 Operation Panel for installation opening drawing).
The extension cable length shall not be more than 5m. And use a standard 8-pin direct plug-in cable (both ends of
RJ45 type) which is shielded and available from market for connection.
Note: Please do not connect devices other than operation panel, such as the computer network cable etc.. Connecting to other
devices may lead to damage to inverter or the connected device.
Goods available from market:
Shielded standard 8-pin direct plug-in
cable (both ends of RJ45 type)
Insert here
Operation panel (back)
Host side
Figure 5-3 Usage of extension cable