Sanken Samco SVC06, Инструкция по эксплуатации, Страница: 114 / 136

- 112 -
10-3 Part Replacement
（
2
）
Steps for replacing fan of SVC06-0110
~
0150
The fan is on the top of the device.
Step 1 Remove two screws (M3).
Step 2 Hook the cover board with a finger and pull to remove it.
Step 3 Pull out the fan and remove the connector, then make a replacement.
After the replacement, reinstall the fan with a sequence of 3 →2→ 1.
Hook here with a finger
M3 screw
Cover board
Fan
Connector
Direction of wind
Figure 10-2 Replacement steps of fan
（
SVC06-0110
~
0150
）
（
3
）
Steps for replacing fan of SVC06-0185
~
0300
The fan is on the top of the device.
Step 1 Remove four screws (M4×8).
Step 2 Pull out the cover board with a finger.
Step 3 Remove four screws (M4×45).
Step 4 Pull out the fan and remove the connector, then make a replacement.
After the replacement, reinstall the fan with a sequence of 4
→
3 →2→ 1.
Figure 10-3 Replacement steps of fan
（
SVC06-0185
~
0300
）
M4×8 screw
Cover plate
M4×45 screw
Fan
Connector
Direction of wind