Sanken Samco SVC06, Инструкция по эксплуатации, Страница: 57 / 136

- 55 -
C
h
ap
ter
5
-
55
-
5-4 Function code display mode
5-4-3 Confirming operation
For some function codes, operation needs to be re-confirmed to prevent data rewriting due to misoperation.
Operation example: setting F1001=10
*1 During alternate display period, if it is desired to interrupt input as any mistake in operation is found, operate the (Back) key
or key to return the display to the function code selection state.
Operation Display Description
or
Display of status monitor (frequency display)
Press the key, the screen will display function block
selection
By turning the quick knob, you can select the target function
module.
or
（
press
）
Press
（
Set
）
key or quick knob, then the function code will
be displayed on display screen.
Turn the quick knob to select the target function code.
or
(press)
Press the
（
Set
）
key or quick knob, then the set value of
function code will be displayed on display screen.
Turn the quick knob to select the new setting
Pressed the (set) key, then the set value and
will be alternately displayed, suggesting that the setting is
being confirmed (*1)
Press the
（
Set
）
key again to confirm the new setting, and
the display will return to function code selection interface.
（
*1
）
or
Press the
（
Back
）
key or key, and the display will
return to function block selection interface.
or
or
Press the
（
Back
）
key or key, and the display will
return to status monitor mode interface.