Sanken Samco SVC06, Инструкция по эксплуатации, Страница: 51 / 136

- 49 -
C
h
ap
ter
5
5-3 Status Display Mode
Monitor mode display refers to the contents displayed on the 7-segment monitor
Table 5-3 Display contents of monitor mode
Display Contents Unit Display Contents Display of 7-segment Monitor
Frequency Hz

Hz

A

rpm

%

M Running: the lit lamp indicates output
frequency
Stopped: the flashing lamp indicates set
frequency
Output current A

Hz

A

rpm

%

M Running: the lit lamp indicates output current
Stopped: the flashing lamp indicates 0.0
Speed rpm

Hz

A

rpm

%

M Running: the lit lamp indicates speed (*1)
Stopped: the flashing lamp indicates speed
(*1)
Load factor %

Hz

A

rpm

%

M Running: the lit lamp indicates load factor
Stopped: the flashing lamp indicates 0.0
Status monitor
display
(No unit) -

Hz

A

rpm

%

M Running: the lit lamp indicates the value
selected by F1202
Stopped: the flashing lamp indicates the value
selected by F1202

Lit Flashing

Unlit
*1 Depending on the motor control modes, the display contents may be somewhat different. The display contents are as shown in
Table 5-4
Table 5-4 Display contents of speed
Motor control mode Running Stopped
Sensorless vector control Estimated speed of motor 0
Others
（
V/f, vector etc.
）
Detecting speed of PG sensor Detecting speed of PG sensor
During the inverter’s status monitoring display, display contents of 7-segment monitor are shifted every time when
the (Back) key or (Set) key is pressed. Display contents of 7-segment monitor can also be shifted through
function codes. See the function code F1201.
Key Switch action
Display in order of: frequency → output current → speed → load factor → status monitor display →
frequency → …
Display in order of: frequency → status monitor display → load factor → speed → output current →
frequency → …