Salicru SLC ADAPT X Series, Руководство пользователя

Страница: 51 / 60

51
7.3.5. Setting menu.
Click on the menu screen to obtain the UPS data logger.
Use icons or scroll through the events.
Tab. 21 provides the complete list of all events that the UPS can
display on the log history screen.
When frequent repetitions of events are detected, it is recom-
mended to contact the T.S.S. or the distributor.
This menu is of great help to the T.S.S. when it comes to deter-
mining certain incidents and/or possible anomalies. The inter-
vention actions involving some events are exclusively reserved
for the T.S.S. or the distributor.
NO. UPS events
1 Clear fault
2 Clear log
3 Load on the UPS
4 Load on the Bypass
5 No load
6 Quick-load battery
7
Floating battery
8
Battery in discharge
9
Connected battery
10 Battery is not connected
11
Manual bypass switch
"On"
12
Manual Bypass switch
"Off"
13 EPO
14 Lack of modules
15
Generator input (it is
necessary to configure a
digital input to detect this
signal)
16 Faulty input
17 Bypass sequence fault
18 Abnormal Bypass voltage
19
Bypass module fault
20 Bypass module overload
21
Time exceeded of the
overload Bypass module
22
Bypass frequency out of
range.
23
Bypass transfer number
exceeded
24 Short circuit at the output
25 Low battery (EOD)
26 Battery test ON
27
Battery test correct
28 Battery maintenance
29 Bat maintenance correct
30
Inserted module
31
Removal of the power
module
32 Rectifier fault
NO. UPS events
33 Inverter fault
34 Rectifier overtemperature
35 Fan fault
36 Output overload
37
Inverter overload time
exceeded
38 Inverter overtemperature
39 Inhibited UPS
40
Manual transfer of static
bypass
41
Quit manual transfer of
static bypass
42 Battery low voltage
43
Wrong battery polarity
44 Inverter protection
45 Input neutral fault
46
Bypass fan fault
47 Manual shutdown
48 Manual quick charge
49
Manual floating charge
50 UPS blocked
51 Parallel cable fault
52 Loss of N + X redundancy
53
End of discharge system
inhibited
54 Battery test fault
55
Battery maintenance
fault
56 Ambient overtemperature
57 Rectifier bus CAN fault
58
Inverter bus CAN fault
59
Inverter bus CAN data
fault
60 Shared load fault
61 Synchronous pulse fault
62 Input voltage detector fault
63
Battery voltage detector
fault
64
Output voltage fault
65
Bypass voltage detector
fault
NO. UPS events
66 Inverter IGBT fault
67
Air temperature exhausting
fault of a module
68 Unbalanced input current
69 DC bus overvoltage
70
Rectifier soft start fault
71 Connection relay fault
72 Short-circuit relay
73
PWM synchronous fault
74 Module in smart standby
75 Manual transfer to inverter
76
Input overcurrent time
exceeded
77 No input temperature probe
78
No output temperature
probe
79
Overtemperature of the
air inlet
80
Reset capacitor time
81 Reset fans’ time
82 Reset battery data logger
83
Reset time fans’ static
bypass
84 Battery overtemperature
85
Life cycle of the static
bypass fan worn
86
Life cycle of the capacitors
of the modules worn
87
Life cycle of the fan of the
power modules worn
88
Driver's Inverter IGBT
blocked
89 Batteries depleted
90
Bypass bus CAN fault
91
Life cycle of the particle
filter exhausted
92 Battery test fault
93
Stopping of the battery
test
94 Wave saved
95 Bypass bus CAN fault
96 Firmware fault
NO. UPS events
97 System configuration fault
98
Static bypass
overtemperature
99 Duplicate ID modules
Tabla 21. List of events.
EMi3 SERVOMOTOR VOLTAGE STABILISER USER'S MANUAL