UNPACKING
After unpacking unit, inspect carefully
for any damage that may have occurred
during transit. Check for loose, missing,
or damaged parts. If any damage is
observed, a shipping damage claim
must be filed with carrier. Do not use
the OEMTOOLS
®
Oscillating Tool if
broken, bent, cracked or damaged
parts (including labels) are noted. Any
Oscillating Tool that appears damaged
in any way, operates abnormally or
is missing parts should be removed
from service immediately. If you
suspect that the Oscillating Tool was
subjected to shock load (a load that was
dropped suddenly, unexpectedly, etc.)
immediately discontinue use until it has
been checked by a factory authorized
service center.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing all
safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please
retain instructions for future reference.
The following safety information is provided as a guideline to help you operate your Oscillating Tool under the safest possible conditions. Any tool or piece of
equipment can be potentially dangerous to use when safety or safe handling instructions are not known or not followed. The following safety instructions are to
provide the user with the information necessary for safe use and operation. Please read and retain these instructions for the continued safe use of your service
system. Failure to follow instructions listed below may result in serious injury. In addition, make certain that anyone who uses the equipment understands and
follows these safety instructions as well.
Operating Instructions and Parts Manual
24495
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
OSCILLATING TOOL
Thank you very much for choosing an OEMTOOLS
®
Product!
For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:
Model:
_______________
Purchase Date:
___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin
using it. This product is designed for certain applications only. OEMTOOLS
®
cannot be responsible for issues arising from modification. We strongly
recommend this product is not modified and/or used for any application other than that for which it was designed. If you have any questions relative to
a particular application, DO NOT use the product until you have first contacted customer service to determine if it can or should be performed on the
product.
WARNING
: Pursuant to California Proposition 65, this product contains chemicals known to the state of California to cause cancer and birth defects
or other reproductive harm. Wash hands after handling.
Explanation of Safety Signal Words
WARNING:
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION:
Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.
NOTES:
Provide clarity and helpful information.
WARNING
1/17
2017 OEMTOOLS
®
