3
6.4.1. Procedure to switch from Normal Mode to Maintenance
Bypass Mode.
6.4.2. Procedure to switch from Maintenance Bypass Mode to
Normal Mode.
6.5. EPO PUSH BUTTON (EMERGENCY STOP). PROCEDURE.
6.5.1. Complete shutdown of the UPS, with EPO.
6.5.2. UPS restart after complete shutdown with EPO.
6.6. AUTOMATIC RESTART.
6.7. OPERATING INSTRUCTIONS FOR MAINTENANCE OF
POWER MODULES.
6.7.1. Maintenance guide for power modules.
6.7.1.1. With the system operating in Normal Mode and the normal
bypass voltage and frequency, with at least 1 power module
as redundant:
6.7.1.2. No power modules operating as redundant:
6.8. OPERATING INSTRUCTIONS FOR MAINTENANCE OF THE
BYPASS AND MONITORING MODULE.
6.8.1.1. With the system operating in Normal Mode and normal
bypass voltage and frequency, transfer the load over the
manual bypass.
6.9. LANGUAGE SELECTION.
6.10. CHANGING THE CURRENT DATE AND TIME
6.11. LEVEL 1 CONTROL PASSWORD.
7. MONITORING PANEL WITH LCD TOUCH
SCREEN.
7.1. INTRODUCTION.
7.2. DIAGRAM OF ENERGY FLOW TO LEDS.
7.2.1. Acoustic alarm.
7.3. DESCRIPTION OF THE SCREENS SHOWN ON THE LCD
TOUCH SCREEN.
7.3.1. Start menu or main screen.
7.3.2. System information menu.
7.3.3. Information menu of the module or power modules (PM).
7.3.4. Setting menu.
7.3.5. Setting menu.
7.3.6. Operation menu.
7.3.6.1. Function icons.
7.3.6.2. Command icons.
7.3.7. Oscilloscope menu.
8. OPTIONAL
8.1. INSTALL AN SNMP DRIVE.
8.2. ROOM TEMPERATURE SENSOR.
9. WARRANTY.
9.1. WARRANTY CONDITIONS.
9.1.1. Terms of the warranty.
9.1.2. Exclusions.
9.2. TECHNICAL SERVICES NETWORK.
10. PRODUCT SPECIFICATIONS.
10.1. INTERNATIONAL STANDARDS.
10.2. ENVIRONMENTAL CHARACTERISTICS.
10.3. MECHANICAL CHARACTERISTICS.
10.4. ELECTRICAL CHARACTERISTICS.
10.4.1. Electrical characteristics (rectifier input).
10.4.2. Electrical characteristics (DC Bus or DC).
10.4.3. Electrical characteristics (Inverter output).
10.4.4. Electrical characteristics (Bypass input).
10.5. EFFICIENCY.
EMi3
SERVOMOTOR VOLTAGE STABILISER
USER'S MANUAL
