Ross Acuity 4410AR-020, Руководство по установке

Страница: 86 / 121

•
MEX DSKY Alpha
— ME
X
DSK
Y
alpha
• MEX KY BackV — ME X Key Y backside
video
• MEX KY BackA — ME X Key Y backside
alpha
•
Aux Bus X
— Aux Bus X
3.
Use the
Conv. Enable
knob to allow the selected
bus to use SmartConversion ( Yes ), or not ( Off ).
4. Press HOME > Confirm .
To Lock a Conversion Loop to a Bus
You can lock a specific conversion loop to a bus. This
dedicates that up/down converter to the selected bus
preventing SmartConversion from using it somewhere
else.
1.
Press
HOME
>
Setup
>
Installation
>
Aux Bus
> SmartConversion > Converter Locking .
2. Use the Aux Bus knob to select the conversion loop
you want to lock to a bus.
3. Use the Lock To Bus/Pair knob to select the bus,
or bus pair, that you want to lock the selected
conversion loop to.
•
None
— the conversion loop is floating.
•
MEX BKGD+PST
— the conversion loop is
locked to the background and preset buses of the
ME. You should lock two conversion loops to
pair to ensure that there is a conversion loop for
each bus.
• MEX KeyY — the conversion loop is locked to
the key bus of the ME.
• Aux Bus X — the conversion loop is locked to
the aux bus.
4. Press HOME > Confirm .
To Set the Fade to Black Display Mode
The display on the Fade to Black module can display
either the current fade rate or the number of available
up/down converters.
1. Press HOME > Setup > Personality .
2. Use the Option knob to select FTB .
3. Use the Value knob to select whether the display
on the Fade to Black module shows the fade to black
transition rate (
FTB
), or the number of available
conversion loops ( SmrtConv ).
86 • SmartConversion — Acuity Setup Manual (v9.2)