7.
Use the
First Fader
knob to select the number, or
position, of the first audio slider on the module.
Each audio module has 8 sliders, so the first slider
on module 1 is 1, the first slider on module 2 is 9,
and so on.
8.
Press
HOME
>
Confirm
.
To Assign Audio Channels to an Audio Fader
1.
Press
HOME
>
Setup
>
Installation
>
More
>
Audio
>
Assign Source
.
2.
Use the
Fader
knob to select the audio fader that
you want to assign an audio channel to.
3.
Use the
Audio Source
knob to select the audio
source that you want to assign to the selected fader.
•
NONE
— no audio channel is assigned to the
fader.
•
Chan X
— assign an audio channel to the fader.
•
Group X
— assign an audio group to the fader.
•
Floating
— have the switcher dynamically
assign the audio channel, or group, that is on-air
to the fader. Audio channel assignment starts
with the lowest number channel that is on-air.
•
Master
— assign the master level to the fader.
4.
Press
HOME
>
Confirm
.
To Unassign an Audio Channel
Each audio channel can be prevented from being assigned
to a fader on the Audio Control module. This is useful
if you only want a single channel from a stereo pair to
be assigned to the Audio Control module. The single
fader will control both channels in the stereo pair, or all
channels in the group.
1.
Press
HOME
>
Setup
>
Installation
>
More
>
Audio
>
More
>
On Fader Module
.
2.
Use the
Audio Channel
knob to select the audio
channel you do not want assigned to the Audio
Control module.
3.
Use the
On Fader Module
knob to select whether
the channel can be assigned to the Audio Control
module (
Yes
), or not (
No
).
SideStick Module
The SideStick module allows you to have a dedicated
module for camera control that is separate from the
control panel.
SIDESTICK
Figure 18: SideStick Module
Tip:
When you connect your SideStick module to the switcher,
you may have to calibrate the positioner. Refer to
on page 93 for information on
calibration.
Keep the following in mind:
Keep the following in mind when using the SideStick:
•
Navigating between cameras requires that the
SideStick module be assigned to a camera first.
•
Press the hold the
Page SEL
button and use the other
buttons to select a specific page or camera.
•
The
NEXT
and
Prev
buttons cycle through the
cameras assignable to the SideStick module. If you
have locked the module to on-air or preview cameras
only, the buttons cycle through only those cameras.
•
The
On Air
button selects the first camera that is
tallied as on-air. A
C:
appears before the camera
name on the display.
•
The
Preset
button selects the first camera that is
tallied on preview. A
C:
appears before the camera
name on the display.
•
Double-press the
On Air
or
Preset
button to have
the SideStick module follow whichever camera is
on-air or preview. As you perform transitions and
select sources the SideStick module jumps to
controlling whichever camera is on-air or preview.
A
F:
appears before the camera name on the display.
To Set SideStick Mnemonic Brightness
The mnemonics on the SideStick module have enhanced
and dimmed brightness levels that apply to all SideStick
modules connected to the switcher.
1.
Press
HOME
>
Setup
>
Personality
>
More
>
SideStick Settings
and press
Global SideStick
Setup
.
2.
Use the
Options
knob to select
Enhanced
Brightness
and use the
Value
knob to select the
level of brightness for selected buttons.
3.
Use the
Options
knob to select
Dimmed
Brightness
and use the
Value
knob to select the
level of brightness for unselected buttons.
Acuity Setup Manual (v9.2) — Panel Modules •
77
Содержание Acuity 4410AR-020
Страница 1: ...Acuity Setup Manual v9 2...
