loaded clip is displayed on the Prepared line on the
Preview Overlay when VTR TC is active. The option to
remove the prepared line entirely is also available.
Press
HOME
>
Setup
>
Personality
and use the
Option
knob to select
VTR POL Prep'd
.
•
Off
— remove the prepared timecode from the
preview overlay.
•
Current
— use the current timecode of the VTR, or
Video Server.
•
Remaining
— use the remaining time of the
currently loaded clip. Cannot be used for VTRs, or
Video Servers.
Wake Up On Command
Allows you to specify whether the control panel will
wake from sleep mode when it receives a command from
OverDrive
®
.
Press
HOME
>
Setup
>
Personality
and use the
Option
knob to select
Wake Up On Command
.
•
On
— control panel wakes up when it receives a
command from OverDrive
®
.
•
Off
— control panel does not wake up when it
receives a command from OverDrive
®
.
Default ME Map
You can specify the default ME that each row on the
switcher, and external row, is assigned to.
To Set Up a Default ME Map
The default ME map assignment is only applied after a
restart or
ALL+ALL
software reset.
1.
Press
HOME
>
Setup
>
Personality
>
ME Maps
.
2.
Use the
Panel Row
knob to select the internal
control panel row (
Row X
) or external row (
Ext
Row X
) that you want to assign an ME to.
3.
Use the
Mapped to ME
knob to select the ME that
you want to assign to the selected row to.
Auto Follow
You can set parts of an ME or Aux Bus to follow the
operation of another part. For example, you can have one
Transition module follow another, a Keyer bus follow
another Keyer bus, or have an entire ME or Aux Bus
follow another. Both parts of the auto follow must be of
the same type, a crosspoint bus can only follow another
crosspoint bus.
Operations, such as crosspoint selection or transitions,
that are performed on one part are repeated on the other
part.
Table 9: Supported Auto Follow Actions
Action
Module
Memory Recall
Memory
Memory Store
Reset ME (Store+Recall)
Cut and Auto Transitions
Keyer
Next Transition Selection on same ME
only
Next Transition Selection
Transition
Transition Type
Cut, Auto, Fader Transitions
Preset Black
Key Priority
Transition Limit
Roll Clip
Transition PV
Source Selection
Bus
Auto follow actions only echo commands, and do not
echo the state. For example, if a transition is performed
on an ME, the auto follow ME also performs a transition,
regardless of what is currently on-air on that ME. If key
1 is on-air on ME 1 but off-air on ME 2, the transition
takes key 1 off-air on ME 1, but on-air on ME 2.
If a memory register contains different setting on each
ME, the local settings will be used. Auto Recall for
memories only ensures that the same memory register is
recalled on the
Echo To ME
. For example, if memory
register 09 is recalled on the
Echo From ME
, memory
register 09 is also recalled on the
Echo To ME
. These
two memory registers may contain different settings.
To Turn On Auto Follow
1.
Press
HOME
>
Setup
>
Personality
>
More
>
Auto Follow Setup
>
Config
.
2.
Turn on auto follows for custom controls (
Auto
Follow CustCtrl
), editor commands(
Auto Follow
Editor
), or control panel button presses(
Auto
Follow Panel
).
•
Auto Follow CustCtrl
— includes custom
control events in command echoing. Events for
ME, buses, or transitions are echoed.
•
Auto Follow Editor
— includes external editor
commands in command echoing.
•
Auto Follow Panel
— includes control panel
button presses in command echoing. Events for
memory recalls, transitions, and source selections
Acuity Setup Manual (v9.2) — Personality •
51
Содержание Acuity 4410AR-020
Страница 1: ...Acuity Setup Manual v9 2...
