25.
Use only power cords specified for this product and
certified for the country of use.
26.
The safe operation of this equipment requires that
the user heed and adhere to all installation and
servicing instruction contained within the
equipment's Setup Manuals.
27.
Warning:
This product includes “ Ethernet
Ports ” which allow this product to be connected
to local area networks (LAN). Only connect to
networks that remain inside the building. Do not
connect to networks that go outside the building.
28.
The 8RU and 4RU frames are to be rack mounted
only.
29.
CAUTION:
These apparatus contain Lithium
batteries, which if replaced incorrectly, or with
an incorrect type, may cause an explosion.
Replace only with the same type. Dispose of
used batteries according to the manufacturer's
instruction.
30.
Warning:
Batteries shall not be exposed to
excessive heat such as sunshine, fire or the like.
31.
For applicable Touchscreen Panel power supplies,
see user instructions contained within the product's
Setup manual.
32.
CAUTION:
The Aux Power connectors PS1 and
PS2 on the back of the Acuity
®
control panels
are for use with the following Acuity
®
approved
accessories: Touchscreen Display
MN:AP-TOUCHSCREEN-A
(PN:4820AR-243-01) and Auxiliary Control
Panels MN:AP-AUX2RU40
(PN:4820AR-283-01), MN:AP-AUX2RU32
(PN:4820AR-282-01), and MN:AP-AUX2RU24
(PN:4820AR-281-01).
ATTENTION :
Les connecteurs d'alimentation
auxiliaire PS1 et PS2 sur le dos des panneaux
de contrôle d' Acuity
®
sont pour une utilisation
avec les éléments suivants Acuity
®
accessoires
approuvés: Écran tactile
MN:AP-TOUCHSCREEN-A (PN:4820AR-243-01
) et de Contrôle Auxiliaire Panneaux
MN-AUX2RU40 (PN:4820AR-283-01 ),
MN:AP-AUX2RU32 (PN:4820AR-282-01 ), et
MN:AP-AUX2RU24 (PN:4820AR-281-01).
33.
Warning:
This product when equipped with
ACU4-EXEIP-IN/ACU8-EXEIP-IN (Evertz
®
IPG-IPBLADE-IP-10GE) or
ACU4-EXEIP-OUT/ACU8-EXEIP-OUT (Evertz
®
IPG-IPBLADE-OP-10GE) ethernet gateway
options, will have fiber optic outputs. Never look
directly into an optical fiber. Irreversible eye
damage can occur in a matter of milliseconds.
34.
CAUTION:
The
ACU4-EXEIP-IN/ACU8-EXEIP-IN (Evertz
®
IPG-IPBLADE-IP-10GE) or
ACU4-EXEIP-OUT/ACU8-EXEIP-OUT (Evertz
®
IPG-IPBLADE-OP-10GE) ethernet gateway
option(s) for this product have 12 SFP ports
available. The Acuity
®
system is designed to
make use of only 8; 7 Dual LC Fiber and a single
1000BASE-T copper modules. The four
additional ports are not indented for use with the
Acuity
®
product.
35.
CAUTION:
RISK OF ABNORMAL SUPPLY
LOADING: USB connected accessory loading
not to exceed 5 USB unit loads. Each USB unit
Load on Rear panel is limited to 250mA max.
36.
CAUTION:
The pressure in the panel struts
diminishes over time. Check the panel strut
locking mechanism before servicing. Stop
maintenance work and contact the manufacturer
if there is a failure of the panel strut locking
mechanism.
37.
For use at altitude 2000m or lower.
38.
For use in non-tropical locations.
39.
CAUTION:
Do not make mechanical or
electrical modifications to the equipment or add
metallic items, such as metallic foil labels, to the
printed circuit boards. Modifications can impair
regulatory compliance, or performance and may
void your warranty.
EMC Notices
US/Canada
United States of America
FCC Part 15
This equipment has been tested and found to comply
with the limits for a class A Digital device, pursuant to
part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a Commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the interference at his own expense.
Acuity Setup Manual (v9.2) — Document Information •
v
Содержание Acuity 4410AR-020
Страница 1: ...Acuity Setup Manual v9 2...
