Aux Bus Names
Allows you to select whether the switcher uses the aux
bus number or name in the menu system and bus map.
Press
HOME
>
Setup
>
Personality
and use the
Option
knob to select
AuxBusNames
.
•
Aux N:M
— use the number of the aux bus (for
example, Aux 4:3).
•
Name
— use the name of the aux bus.
Bank 0 Lit
Sets whether or not the
BANK
button on the Memory
Modules is lit when bank 0 is selected.
Press
HOME
>
Setup
>
Personality
and use the
Option
knob to select
Bank 0 Lit
.
•
Off
— the
BANK
button is not lit when bank 0 is
selected.
•
On
— the
BANK
button is lit when bank 0 is selected
in the Memory Module, or Global Memory Module.
BKGD Double Press
Allows you to have a double-press of the
BKGD
or
KEY
X
button on a Transition Module set up the next transition
to take the keys off-air. Double-press the
BKGD
button
to select background and all on-air keys as part of the
next transition. Double-press any
KEY X
button to select
all on-air keys as part of the next transition, and not
include background.
Press
HOME
>
Setup
>
Personality
and use the
Option
knob to select
BKGD Double Press
.
•
Off
— not include the on-air keys with the next
transition when the
BKGD
or
KEY X
button is
double-pressed.
•
On
— include all on-air keys with the next transition
when the
BKGD
or
KEY X
button is double-pressed.
CC/Macro Attachments
Sets whether or not custom controls that are attached to
control panel buttons using the Attach Custom Controls
Menu are run when the button is pressed.
Press
HOME
>
Setup
>
Personality
and use the
Option
knob to select
CC/Macro Attachments
.
•
Off
— custom controls attached to control panel
buttons are not run when the button is pressed.
•
On
— custom controls attached to control panel
buttons are run when the button is pressed.
CC Global Recall
Sets whether or not the
RECALL CLIP/CC
button on
the Global Memory module can be used to run a custom
control.
Press
HOME
>
Setup
>
Personality
and use the
Option
knob to select
CC Global Recall
.
•
Off
— only allow clips to be recalled from the Global
Memory module using the RECALL CLIP/CC button.
•
On
— only allow custom controls to be run from the
Global Memory module using the RECALL CLIP/CC
button.
CC Held/Paused Display
Sets whether the mnemonic of a custom control show
Held or Pause when the custom control is at that state
(
Held/Paused
), only shows the name of the custom
control (
CC Name
), or shows both the Held or Paused
and the name of the custom control (
Both
).
Press
HOME
>
Setup
>
Personality
and use the
Option
knob to select
CC Held Display
.
•
Held/Paused
— shows Held or Paused in the
mnemonic for a custom control that is at a held or
paused state.
•
CC Name
— shows the name of the custom control
when the custom control is at a held or paused state.
•
Both
— shows both the name of the custom control
and Held or Paused when the custom control is at a
held or paused state.
CC Memory State
Sets whether the Effects Dissolve and Keys Only settings
of a memory are used when the memory is recalled with
a custom control. Recalling the memory directly is not
affected. This allows the custom control to recall a single
memory and override the Effects Dissolve and Keys Only
on or off settings of how the memory was stored. This
setting overrides the Auto Recall personality option.
Press
HOME
>
Setup
>
Personality
and use the
Option
knob to select
CC Memory State
.
•
Off
— Effects Dissolve and Keys Only are recalled
how they are stored in the memory.
•
On
— Effects Dissolve and Keys Only can be
overridden in a custom control that recalls the
memory.
Clear Bus Hold on All-All
Sets whether or not the Bus Hold selection on a bus is
cleared when a soft-reset is performed.
Press
HOME
>
Setup
>
Personality
and use the
Option
knob to select
Clear Bus Hold
.
42
• Personality — Acuity Setup Manual (v9.2)
Содержание Acuity 4410AR-020
Страница 1: ...Acuity Setup Manual v9 2...
