Pbus Extra Options
Value
Option
Select the type of query commands supported
by the Pbus device.
•
Relaxed
— control all devices connected
to the Pbus device whether they respond
to the query command or not.
•
Strict
— control only devices connected to
the Pbus device that respond to query
commands.
•
Silent
— control all devices connected to
the Pbus device, without using query
commands. The switcher does not sent
query commands.
Query Cmd
Robotic Camera Extra Options
Value
Option
Select whether the camera controller starts
counting connected camera heads at 0 or 1.
Base
Select whether the switcher sends out a select
camera command when the camera is already
selected (
ON
), or the switcher doesn't send out
the command when the desired camera is
already selected (
OFF
)
Cam Reselect
Select whether the switcher checks for a device
timeout (
Yes
) or ignores the timeout (
No
).
Check
timeout
Select the length of time, in 16ms increments,
that the switcher waits between sending
commands to the camera.
CmdDelay
Select the maximum focus speed.
Focus Speed
Select whether you want the iris of the camera
controlled by the lens (
Lens
), or the camera
controller (
Camera
).
Iris Control
Select whether the size of the iris opening is
changed by the velocity at which the iris ring is
turned (
Velocity
), or incrementally by value
(
Incremental
).
Iris Mode
Select the number of bits in the camera control
signal. Different camera head controllers use
different numbers of bits. Choose the value that
gives you a 100% display when the iris is fully
open.
Iris Res
Select the speed at which the iris opens and
closes.
Iris Speed
Select whether the camera is using a
Rainbow-CCTV lens (
Rainbow
), or a
Fujinon/Canon Telcon lens (
Fujinon
).
Lens Type
Add (
Yes
) or remove (
No
) the
Pedestal (Black)
button from the
Camera Head Control
menu.
Master Ped
Value
Option
Select the make and model of camera head
you are controlling using the VISCA protocol.
•
Generic
— camera head supporting VISCA
but not listed below.
•
Sony BRC-300
— select for a Sony
®
BRC-300 and BRC-300p camera heads.
•
Sony BRC-700
— select for a Sony
®
BRC-H700 camera head.
•
Sony BRC-900
— select for a Sony
®
BRC-H900 camera head.
•
Ross PIVOTCam
— select for a Ross
®
PIVOTCam-20 camera head.
Model
Select the amount of damping you want on pan
and tilt movements. The higher the value, the
more damping is applied.
Pan/Tilt
Damping
Select the maximum pan and tilt speed. The
higher the value, the faster the pan and tilt
speed.
Pan/Tilt
Speed
Select a unique ID that the camera uses to
identify the switcher.
Panel ID
Select the maximum pan speed for the camera
head.
Pan Speed
Select whether only the currently selected
camera is polled (
Selected
), or all cameras are
polled (
All
). We recommend that you only use
Selected
if instructed to do so by Ross Video
Technical Support.
Poll
Select the protocol that is used by the positioner
on your camera controller.
•
Level 0
— disable joystick/positioner
control.
•
Level 1
— enable Pan, Tilt, Zoom, and
Focus control.
•
Level 3
— enable Pan, Tilt, Zoom, Focus,
Iris, Mped (Black Level) and Elevation
control.
•
Level 4
— enable all for controls of Level
3, plus Shot Store.
Protocol
Select whether the camera is being controlled
using a
Serial
or
IP
protocol.
Protocol
Select the amount of time that the switcher
allows for a camera to recall a shot.
RclTime
Select the length of time, in fields, that the
switcher will wait after selecting a camera.
Select Delay
Select the type of serial switch you are using
to connect to your camera.
•
STS-12
— assign an STS-12 Serial Control
Transfer Switch to the selected port.
•
CP-RMR-S
— assign a CP-RMR-S Serial
Receiver to the selected port.
•
DS-4
— assign a DS-4 Device Server to
the selected port.
SerialSwitch
Select whether shots are indexed based on 0
or 1.
ShotOffset
Acuity Setup Manual (v9.2) — Device Control •
65
Содержание Acuity 4410AR-020
Страница 1: ...Acuity Setup Manual v9 2...
