G A L A X Y N A S L X 5 C O N F I G U R A T I O N A N D S Y S T E M I N T E G R A T I O N G U I D E
56
Section 3 Menu Functions
mib-2.host
mib-2.ip
mib-2.tcp
mib-2.udp
mib-2.interfaces
mib-2.at
system.
Function: UPnP Settings fig 3.1.3d
This function enables UPnP protocol for device notification.
Function: Remote access fig 3.1.3d
Using this function, you can administrate console tools remotely by ssh protocol (secure shell). Default
user is 'cli' and you cannot change it, but password can be change.
Allow IP:
You can assign IP addresses (separated by a semicolon) that are granted to server remote
access. The field left blank means no restriction.
Set port:
Default port is 22222 for security reasons, because high ports are invisible for port scanners.
You can change it only from range 1024-65535 except ports already used.
Password
: Length of password is minimum 8 characters. Be sure to use strong passwords.
Confirm password:
Please retype your new password. Password cannot contain characters: ' " ` ^ &
$ # [ ] \/ | * and spaces.
To connect to the Galaxy NAS LX5 from Linux/MacOSX systems use:
Figure 3.1.3d
