G A L A X Y N A S L X 5 C O N F I G U R A T I O N A N D S Y S T E M I N T E G R A T I O N G U I D E
40
Section 3 Menu Functions
Function: DNS settings fig 3.1.1b
This function enables you to enter
DNS
addresses. Please use semicolons to separate addresses.
Function: Create new bond interface fig 3.1.1c
Bonding allows for load-balancing or fail-over for the incoming and outgoing connections. Here you can
create or edit bonding network interface.
In order to create bonding interface:
select network interfaces from which you want to create a new bonding interface.
select desired bonding mode from Create drop down menu.
select dynamic (DHCP) or static configuration of network interface.
if you want to dynamically get DNS address, select "get DNS".
when using static configuration of network interface enter address IP, netmask, broadcast and gateway
apply Create button, new bonding interface will be created now.
Important:
Using cards from different manufacturers or cards based on different chipsets in one
bond team may cause low performance or unstable behavior.
Figure 3.1.1b
Figure 3.1.1c
