G A L A X Y N A S L X 5 C O N F I G U R A T I O N A N D S Y S T E M I N T E G R A T I O N G U I D E
105
Section 3 Menu Functions
For robot control attached to an NDMP host, you must specify Robot Device path, NDMP Host name
and SCSI coordinates (only for windows hosts).
After pressing OK, a prompt appears asking whether you want to stop and restart the NetBackup
Device Manager Service; (this also stops and restarts any robotic processes). If your changes are
complete, answer yes to this prompt.
To add a drive in the NetBackup Administration Console, select Media and Device Management
Devices. Select Actions
New
New Tape Drive. The properties that appear in this dialog vary
slightly, depending on the type of host platform and the robot type.
Drive Name
This name is used to identify the drive. It is important to note that each drive name must be unique.
Descriptive names are recommended. Drive names are limited to 48 characters.
