IMR01N12-E7
A-1
APPENDIX
A. Setting Data List
A-1. SV setting & Monitor mode
Name Parameter Data
range
Factory set
value
User set
value
Page
Input 1_
measured
value
(PV1)/
set value (SV1) monitor
The upper section:
Displays Input 1_PV1
The lower section:
Displays Input 1_SV1
P.
30
P. 102
Input 2_
measured
value
(PV2)/
set value (SV2) monitor
The upper section:
Displays Input 2_PV2
The lower section:
Displays Input 2_SV2
P.
30
P. 103
Input 1_
measured
value
(PV1)/
Input 2_measured value
(PV2)
monitor
The upper section:
Displays Input 1_PV1
The lower section:
Displays Input 2_PV2
P.
30
P. 103
Input 1_set value (SV1)
(1. SV)
Input 1_setting limiter low to
Input 1_setting limiter high
0.0
P.
30
Input 2_set value (SV2)
(2. SV)
Input 2_setting limiter low to
Input 2_setting limiter high
0.0
P.
30
Remote input value monitor
(SVr)
Input 1_setting limiter low to
Input 1 _setting limiter high
P.
30
P. 103
PV1 peak hold value monitor
(1.PHLd)
The maximum PV1 value (peak value)
of Input 1 is held and displayed.
P. 30
P. 103
PV1 bottom hold value
monitor
(1.bHLd)
The minimum PV1 value (bottom
value) of Input 1 is held and displayed.
P. 30
P. 104
PV1 hold reset
(1.HLdr)
PV1_hold value is reset when the UP
and DOWN keys a simultaneously
pressed.
P. 30
P. 105
PV2 peak hold value monitor
(2.PHLd)
The maximum PV2 value (peak value)
of Input 2 is held and displayed.
P. 30
P. 105
PV2 bottom hold value
monitor
(2.bHLd)
The minimum PV2 value (bottom
value) of Input 2 is held and displayed.
P. 30
P. 105
PV2 hold reset
(2.HLdr)
PV2_hold value is reset when the UP
and DOWN keys a simultaneously
pressed.
P. 30
P. 105
Input 1_manipulated output
value (MV1) monitor
(1. MV)
Input 1_MV scaling low to
Input 1_MV scaling high
P.
30
P. 106
Input 2_manipulated output
value (MV2) monitor
(2. MV)
5.0 to
105.0 %
P.
30
P. 106
Event monitor
(EVM)
SV thousands digits: EV4 (LBA2)
SV hundreds digits: EV3 (LBA1)
SV tens digits:
EV2
SV units digits:
EV1
P.
30
P. 106
Continued on the next page.
