6. PARAMETER SETTING MODE
IMR01N12-E7
33
Parameters which are not related to existing functions on the controller are not displayed.
To return the SV setting & Monitor mode, press and hold the SET key for 2 seconds, or press the shift
key while pressing the SET key.
This instrument returns to the PV1/SV1 monitor screen if no key operation is performed within
1 minute.
Multi-memory area function:
Multi-memory area function can store up to 16 individual sets of
SVs and parameters in Parameter setting mode.
One of the Areas is used for control, and the currently selected
area is “Control Area”.
Control Area
Input 1 Input 2
Set value (SV)
Event 1 set value
Event 2 set value
Event 3 set value
Event 4 set value
LBA (Control loop break alarm)
LBA deadband
Proportional band
Integral time
Derivative time
Control response parameter
Setting change rate parameter (up)
Setting change rate parameter (down)
Area soak time
Link area number
16
15
2
1
Memory Area
Ramp/Soak control is possible by using Area soak time, Link
area number and Setting change rate limiter (up/down) in
Parameter setting mode.
Area soak time of
memory area 1
Setting change rate
limiter (up) of memory
area 2
Setting change rate
limiter (up) of memory
area 1
Area soak time of
memory area 2
Setting change rate
limiter (down) of
memory area 3
Area soak time of
memory area 3
Measured value (PV)
Set value (SV) of
memory area 2
Set value (SV) of
memory area 1
Set value (SV) of
memory area 3
Present set value (SV)
Time
Memory area 2
Memory area 3
Memory area 1
[Usage example
]
Input 2_proportional band
AREA
Return to first parameter setting item of Parameter setting mode
SET key
SET key
Input 2_integral time
SET key
Input 2_derivative time
AREA
AREA
SET key
From Input 1_control response parameter setting screen
SET key
Input 2_control response
parameter
AREA
SET key
Input 1_setting change rate limiter
(up)
AREA
SET key
Input 1_setting change rate limiter
(down)
AREA
SET key
Input 2_setting change rate limiter
(up)
AREA
Input 2_setting change rate limiter
(down)
AREA
SET key
Area soak time
AREA
Link area number
AREA
SET key
SET key
(P.37)
(P.37)
(P.37)
(P.38)
(P.38)
(P.39)
(P.38)
(P.39)
(P.40)
(P.41)
: Parameters related to multi-memory area function
: Parameters displayed when function is specified.
