Riken Keiki GD-84D-EX Series, Руководство по эксплуатации

Страница: 127 / 194

7. Maintenance 7-10 Making changes in Environmental setting 2
127 / 191
7-10-14 Sensitivity correction settings (S ASSIST)
Set ON/OFF for the sensitivity correction function for each sensor. (Refer to '6-4-3 Sensitivity correction
function’.)
The default setting is ON.
NOTE
 The sensitivity correction settings are possible for electrochemical type detection principle sensors.
1 In maintenance mode, press the ▲ key or ▼ key to
select [2-10 SETTING2], then press the TEST/SET key.
2 Press the ▲ key or ▼ key to select [SET-14 S ASSIST],
then press the TEST/SET key.
3 Press the ▲ key or ▼ key to select the sensor.
Press the ▲ key or ▼ key repeatedly to cycle through the
following settings: [A1] ⇔ [A2] ⇔ [B1] ⇔ [B2].
The setting value for the selected sensor blinks.
4 Press the TEST/SET key to confirm the sensor.
5 Press the ▲ key or ▼ key to select [ON] or
[OFF], then press the TEST/SET key.
The display reverts to the display in step 3.
To continue making settings for other sensors, repeat steps 3 to 5.