Ricoh VT3500, Руководство по обслуживанию

Страница: 168 / 330

No. Item Typical Problems Preferred designated area
Designated area Area recognized
6 Gap between
the
designated
area and
neighboring
image, or gap
between two
designated
areas. When the gap
between the
designated area
and neighboring
image is too
small. Depending on
the original feed
condition
(registration
and skewing) or
handwriting
ability the
designated
area, the
neighboring
image may or
may not be
recognized as a
designated area.
1) There should be more than 2
mm clearance between the line
and image.
2) Mark the line away from the
image in the designated area
move than 2 mm to recognized
the image completely.
3) For consideration of the
handwriting ability, approximately
5 mm is needed between the
neighboring image and image to
be designated as a clearance.
2 mm
2 mm
2 mm 2 mm
(Image to be designated)
Neighboring Image
Line
1 December 1993
2-132