Ricoh VT3500, Руководство по обслуживанию

Страница: 167 / 330

No. Item Typical Problems Preferred designated area
Designated area Area recognized
3 Thickness of
the
designating
line. The thickness
of the line as
follows: As the line of
the designated
area is too thin,
no designated
area is
recognized. Mark with a line more than 1 mm
in width.
(More than 2 mm in 50%
reduction mode.)
X
≤
1 mm
Y
≤
0.6 mm
(In Full Size
Mode)
4 Density of the
designated
line. When using a
pencil or a color
pen. (The line
has low image
density.) As the
designating line
is too light, no
designated area
is recognized. Mark using a black pen.
5 Type of
command
sheet. 1) Rough paper
is used as a
command sheet. 1) Any fibrous
black spots will
be read as a
designated area. 1) Use white paper (65 g/m
2
).
2) If the
command sheet
has a different
friction
coefficient from
the original. 2) Due to
different
registration of
the original and
the command
sheet, the
designated
areas will be
different from
the imagined
positions. 2) Use the same paper as the
original.
X
Y
1 December 1993
2-131