Ricoh VT3500, Руководство по обслуживанию

Страница: 186 / 330

10.3 MASTER PLOTTING AND PRINTING AREA
Items Standard Note
[A3/DLT Drum: Length]
1) Master plotting area
changes according to
paper size.
2) In enlarge or reduce
mode, the 10 mm
margin is not enlarged
or reduced.
3) If the machine knows
the paper size, it allows
for a 3 mm blank margin
at the paper’s trailing
edge. If paper size
detection is cancelled
through the SP mode,
the machine will not plot
the last 2 mm of the
original on the master.
When the combine
2 originals mode is
selected. 4) In combine 2 originals
mode, the trailing edge
of the 1st image has a 2
mm margin and the
leading edge of the 2nd
image has a 4 mm
margin. (These margins
vary according to the
magnification ratio.)
Maximum Image Length: 405 mm
Maximum Master Plottingng Length:
410 mm
Screen Mesh Length: 436.2 mm
Master Cut Length: 535 mm
Master Plotting Length
Printing Pressure
Original
Master
Screen
Paper
(Image Position
±
0)
A3 (=420 mm)
(407) 10
94.3
3
10
Image Area Length (=405)
Screen Mesh Length (436.2)
Master Length (535)
1.6
Master
94.3
10 4
Master Length (535)
1st Original 2nd Original
1st Original
End of the
2
1 December 1993
2-150