Ricoh VT3500, Руководство по обслуживанию

Страница: 38 / 330

1. MASTER EJECT SECTION
1.1 OVERALL
At the end of the printing cycle, the used master remains wrapped around the
drum to prevent the ink on the drum surface from drying. When the Master
Making key is pressed to make a new master, the used master is ejected
from the drum.
The master is pulled off the drum, then it goes through the eject rollers and
into the master eject box. A pressure plate then compacts the used master.
•
Drum [B] rotates in reverse
(opposite to printing direction).
•
Master eject rollers [A] rotate.
•
Lower eject roller [C] is pressed
against the drum.
•
The trailing edge of the master
curls off the drum and passes
between the upper [E] and lower
[F] eject rollers, and the master [D]
is dumped into the master eject
box [G].
•
The pressure plate [H] compacts
the ejected master [I].
[A]
[B]
[C]
Drum
[E]
[D]
[F]
[G]
[H]
[I]
1 December 1993
2-2