Ricoh VT3500, Руководство по обслуживанию

Страница: 282 / 330

6.17 SEPARATION PLATE/LOWER SEPARATION ROLLER
[Separation Plate]
1. Remove the separation plate [A] with the spring [B] (1 screw).
[Lower Separation Roller]
1. Remove the plotter unit, paper feed roller unit and drum unit.
2. Remove the 2 springs [C] and slide the upper second feed roller [D] in the
direction of the arrow.
NOTE: Use a spring hook. That way the spring will not drop into the
machine.
3. Remove the upper and lower guide plates [E] (2 screws).
NOTE: When reassembling the guide plates, make sure that the guide
plates do not touch the lower second feed roller.
4. Remove the spring [F] hooked on the front separation lever [G].
5. Remove the front separation lever [G] (1 screw).
6. Remove the lower separation roller shaft [H].
7. Remove the lower separation roller [I] from the shaft (one Allen screw).
NOTE: When reassembling the lower separation roller, confirm that the
front and rear separation levers [G] move smoothly.
[B]
[A]
[I]
[H]
[F]
[G]
[E]
[C]
[D]
1 December 1993
5-48