10.2.14 Other Guidance Displays
Condition
Guidance Display Message
When more than one command sheet
is used in make-up mode: after a
command sheet is read, the following
command sheet is not present on the
original table.
SET
THE COMMAND SHEET/S
In combine 2 originals mode, if the
make-up mode is selected, the
command sheet for the 2nd original is
not placed on the original table after
the 2nd original is read.
In make-up mode, the original is not
placed on the original table after the
command sheet is read.
SET THE ORIGINAL 1)
In combine 2 originals mode, the 2nd
original is not placed on the original
table after the 1st original is read.
The original width exceeds the print
paper width when multiplied by a
magnification ratio.
CHECK THE PAPER SIZE
PRESS MASTER KEY 2)
NOTE:
1) When this message is displayed, input from the Make-up key, Image
Positioning key, Fixed Magnification key and Program key are not
accepted.
2) This message is displayed for 3 seconds after the master making key is
pressed. "READY TO START" is then displayed.
If the operator does not change the paper size, the print paper size
detected on the paper table is valid for master making.
In the following cases, the guidance message is not displayed when the
Master Making key is pressed. Master Making starts as soon as the
Master Making key is pressed.
•
In zoom mode
•
In directional magnification mode
•
In image shift mode
•
For reading the 2nd and following command sheets.
•
For reading the 2nd original in the combine 2 original mode.
1 December 1993
2-148
Содержание VT3500
