Ricoh MPC 2800 AT-C2, Руководство по обслуживанию на месте, Страница: 713 / 856

018
Server URL Path (Secondary) DFU
This is used for the scan router program.
019
Capture Server Scheme DFU
This is used for the scan router program.
020
Capture Server Port Number DFU
This is used for the scan router program.
021
Capture Server URL Path DFU
This is used for the scan router program.
022
Rapid Sending Control
Enables or disables the prevention function for the continuous data sending error.
[0 to 1 / 0 / -]
0: Disable, 1: Enable
5846 [UCS Settings] *CTL -
001
Machine ID (For Delivery Server) Displays ID
Displays the unique device ID in use by the delivery server directory. The value is only
displayed and cannot be changed. This ID is created from the NIC MAC or IEEE 1394
EUI. The ID is displayed as either 6-byle or 8-byte binary.
002
Machine ID Clear (For Delivery Server) Clears ID
Clears the unique ID of the device used as the name in the file transfer directory. Execute
this SP if the connection of the device to the delivery server is unstable. After clearing the
ID, the ID will be established again automatically by cycling the machine off and on.
003
Maximum Entries [2000 to 20000/ 2000 /1 /step]
Changes the maximum number of entries that UCS can handle.
If a value smaller than the present value is set, the UCS managed data is cleared, and the
data (excluding user code information) is displayed.
006
Delivery Server Retry Timer [0 to 255 / 0 / 1 /step]
Sets the interval for retry attempts when the delivery server fails to acquire the delivery
server address book.
System Service Mode
357
8