Ricoh MPC 2800 AT-C2, Руководство по обслуживанию на месте, Страница: 686 / 856

014 Clear DCS Settings Initializes the DCS (Delivery Control Service) settings.
015 Clear UCS Settings
Initializes the UCS (User Information Control Service)
settings.
016 MIRS Setting
Initializes the MIRS (Machine Information Report Service)
settings.
017 CCS
Initializes the CCS (Certification and Charge-control
Service) settings.
018 SRM Memory Check Initializes the SRM (System Resource Manager) settings.
020 Web Uapli Initializes the web user application settings.
021 ECS Initializes the ECS settings.
5802
[Free Run]
Performs a free run on the copier engine.
• The machine starts free run in the same condition as the sequence of A4/LT, A3 or
A4 SEF printing from the 1st or 2nd tray. Therefore, the correct paper should be
loaded in the 1st tray or 2nd tray, but paper is not fed.
• The main switch has to be turned off and on after using the free run mode for a test.
001 TRAY1: A4LEF: FC -
- 002 TRAY2: A3: FC -
003 TRAY2: A4SEF: FC -
5803 [Input Check] - See "Input Check Table" in this section.
5804 [Output Check] - See "Output Check Table" in this section.
5805 [Anti-Condensation Heater]
002 0:OFF / 1:ON *ENG [0 or 1 / 0 / -]
8. Appendix: SP Mode Tables
330
8