Ricoh MPC 2800 AT-C2, Руководство по обслуживанию на месте, Страница: 587 / 856

001 Paper Transfer: Thick 3: 1st Side *ENG [10 to 250 / 120 / 5%/step]
002 Separation DC: Thick 3: 1st Side *ENG [10 to 250 / 80 / 5%/step]
2662
Adjusts the environment coefficient for each mode. When the environment is detected as HH,
SP2650 is multiplied by these SP values.
003 Paper Transfer: Thick 3: 2nd Side *ENG [10 to 250 / 120 / 5%/step]
004 Separation DC: Thick 3: 2nd Side: *ENG [10 to 250 / 80 / 5%/step]
2751
[Special 1: Bias]
Adjusts the DC voltage of the discharge plate for special paper 1.
Plain: 154 mm/sec, Fine: 77 mm/sec
001 Separation DC: Plain: 1st Side *ENG [0 to 4000 / 2000 / 10 –V/step]
002 Separation DC: Plain: 2nd Side *ENG [0 to 4000 / 3000 / 10 –V/step]
003 Paper Transfer: Thick 1: 1st Side *ENG [0 to 4000 / 2000 / 10 –V/step]
2753
[Special 1: Bias: BW]
Adjusts the current for the paper transfer roller for special paper 1 in black-and-white mode.
Plain: 154 mm/sec, Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side *ENG
[0 to 200 / 22 / 1 – μ A /step] 002 Paper Transfer: Plain: 2nd Side *ENG
003 Paper Transfer: FINE: 1st Side *ENG
2757
[Special 1: Bias: FC]
Adjusts the current for the paper transfer roller for special paper 1 in full color mode.
Plain: 154 mm/sec, Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side *ENG [0 to 200 / 22 / 1 –
μ
A /step]
002 Paper Transfer: Plain: 2nd Side *ENG [0 to 200 / 33 / 1 – μ A /step]
003 Paper Transfer: Plain: 1st Side *ENG [0 to 250 / 15 / 1 –
μ
A /step]
System Service Mode
231
8