Rexroth Indramat CLM1.4, Руководство пользователя

Страница: 225 / 274

11-12
Diagnostic Messages CLM01.4-LAP-01VRS
DOK-CONTRL-CLM01.4LAP1-FK01-EN-P
E R R O R
Hex Code 31 = Write attempt of an NC command to a
W r i t e S y s . - V a r .
variable < 600
E R R O R
Hex Code 32
= Erroneous variable value during execution of the
V a r i a b l e v a l u e
command
During the execution of a command, the content of a variable is
accessed. The content is checked against correctly functioning values in
the command:
too large
operational sign
integer value
E R R O R
Hex Code 33 Fieldbus Hardware
F i e l d b u s
x x
xx: 0 = No Error
1 = Flash Erase Error
2 = Verify Error
3 = Programming Error
4 = Wrong Hardware
5 = Card Missing
FF = Timeout
E R R O R
Hex Code 34
Fieldbus Initialization
F i e l d b u s I n i t
x x
xx: 0 = No Error
F0 = Timeout, Initialization command could not be transmitted.
F1 = Timeout, Initialization command was not acknowledged.
F2 = Fieldbus Parameter Error
F3 = No valid fieldbus data. Initialization command was not
executed.