Rexroth Indramat CLM1.4, Руководство пользователя

Страница: 36 / 274

CLM01.4-LAP-01VRS Display and Operating Devices
4-7
DOK-CONTRL-CLM01.4LAP1-FK01-EN-P
Display: Inputs / Outputs / Marker Flags
The bits of the selected byte are displayed. Every line allows Inputs /
Outputs / Marker Flags to be displayed.
The byte address can be changed by pressing or . Every line allows
Inputs / Outputs / Marker Flags to be displayed. Using the or keys,
you can move between lines.
I / O - S t a t u s
I 1 . 0 0 . . . 1 1 . . 1
Q 1 . 0 1 1 1 1 . . 1 1 1
M 2 . 0 2 . . . 1 1 1 . .
The cursor can be positioned here using the key. Using the and
keys, the user can invoke a different display.
Counter Display
Counter Display Mode
Display of the Program Instruction Number
M : 1 2 3 4 C o u n t e r
A c t . :
T o t a l :
In this display mode, the current status of any programmed counter can
be viewed. The desired program instruction number must be entered in
the first line.
To achieve this, the cursor can be moved to the program instruction
number by pressing
or and then enter the desired number using the
keys to . The entered program instruction number is maintained in
all operating conditions, until a new number is input. If no counter is
programmed in the displayed program instruction, nothing is displayed on
the second, third and fourth lines.
When the cursor is in its base position, the user can leave this display
mode. With the cursor in this position, the user can also scroll back or
forward through program instruction numbers in increments of 1 using the
and keys.
Bit 7 . . . . .0