Radyne ComStream TIERNAN SE4000, Инструкция по установке и эксплуатации

Страница: 24 / 161

SE4000 MPEG-2 Contribution Encoder Introduction
01-0934-401-B 2-3
Corrupted AC input power can interrupt SE4000 operations and cause
permanent damage to the unit. You should purchase and install a
commercially available, external AC power conditioning surge
suppressor to protect the SE4000 against power spikes and line
transients..
2.1.5 Power-up Sequence
Once the cabling and interconnections for the SE4000 are completed, the unit may be powered
up. The SE4000 power switch is a rocker switch located on the front panel. The power switch is
labeled 1/0 where the 1 represents the On position and the 0 represents the Off position.
To power up the SE4000, press the power switch to the On, or 1 position. The power-on cycle
takes approximately 20 seconds, as the unit performs extensive self-diagnostics in this time
period.
During the powered- up cycle, the SE4000 displays
SE4000 Standard Definition
Encoder Initializing...
, various messages may scroll across the LCD display, and the tri-
colored Status LED illuminates and may flash.
After the unit is initialized, the LCD displays the SE4000 Main Menu.
SE4000
[Quickset] Service Output Status
When beginning the initial SE4000 installation and configuration, the
modulator output (Mod State) should be turned off until ready to begin
satellite transmissions.