Radyne ComStream TIERNAN SE4000, Инструкция по установке и эксплуатации

Страница: 45 / 161

Using a Remote Unit SE4000 MPEG-2 Contribution Encoder
4-12 01-0934-401-B
Pressing the modulator control buttons causes the SE4000 to toggle the modulator as follows:
Current
Modulator
State
Key Press Resulting Modulator
State
Off Mod Modulate On
Carrier Off
Carrier On Mod Modulate On
Carrier Off
Modulator On Mod All Off
Off Carrier Modulate Off
Carrier On
Carrier On Carrier All Off
Modulate On Carrier Modulate Off
Carrier On
3.8 Front Panel Menu Summary
The following table lists detailed descriptions of the SE4000 front panel commands. The
commands are organized in the order in which they appear on the front panel. Included are:
•
Menu level to which the command is attached.
•
Front panel command.
•
Command function.
•
Available options for that command or the response format if the command is query-only.
Front Panel Menu Summary
Command Function Options/Response Format
Main Menu - consists of the following submenus:
? QuickSet - used to quickly and easily re-initialize the encoder using predefined factory default
configuration settings or user-defined configuration settings.
? Service - used to setup and configure the video, VBI, audio, data, and PCR services
?
Output - used to configure a nd monitor the SE4000 internal modulator
? Status – Used to quickly query either the current or status or the fault history log.
? CA - Conditional Access menu is used to setup the SE4000 for conditional access and to create
and modify a list of authorized decoders
?
Control - allows you to configure and manage the SE4000 hardware.
? Version – Displays the Software version number and unit serial number
? FP LOCK – Provides a method of “locking out the front panel to read-only mode.
Main>QuickSet
Menu
Consists of 24 Quickset choices, which allow quick and easy saving and
recalling of user-defined configurations sets, management of the user-defined
list, and then re-initialize the SE4000 using either the user-defined configuration
sets or predefined factory default configuration settings. These configuration
sets are not altered by reset, power cycling, or factory DVB default setting of the
encoder.
DVB Initializes the SE4000 to the
factory default configuration
parameters.
? DVB (default)
? This configurationcan not be modified by the
user.
Empty 1 - 23 Saves the current site-specific
configuration in non-volatile
Up to 24 user-defined configuration sets may be
saved. Configuration sets must be saved to