Radyne ComStream TIERNAN SE4000, Инструкция по установке и эксплуатации

Страница: 15 / 161

SE4000 MPEG-2 Contribution Encoder Table of Contents
01-0934-401-B xv
3.11.2 Unlocking the Front Panel ________________________________________ 3-31
3.12 Date and Time ___________________________________________________ 3-31
3.12.1 Setting the Date ________________________________________________ 3-31
3.12.2 Setting the Time ________________________________________________ 3-32
3.13 System Reset____________________________________________________ 3-32
3.14 Embedded Audio Configuration _____________________________________ 3-32
3.14.1 Configuring the Encoder for Embedded Audio ________________________ 3-32
3.15 Embedded Audio Configuration (BISS/PGCA) __________________________ 3-32
3.16 VBI: Teletext, Closed Captions, and Expanded Windows _________________ 3-32
Using a Remote Unit
4.0 Configuring the Remote Control Software Parameters _____________________ 4-1
4.1 Ethernet Port Telnet_________________________________________________ 4-2
4.1 Ethernet Port Browser Window _______________________________________ 4-3
4.2 Remote Communications Overview ____________________________________ 4-3
4.2.1 Command Types _________________________________________________ 4-3
4.2.2 Command Elements _______________________________________________ 4-4
4.3 Issuing Remote Commands __________________________________________ 4-4
4.3.1 Typing Remote Commands _________________________________________ 4-5
4.3.2 Entering Parameter Values _________________________________________ 4-5
4.4 Error Messages ____________________________________________________ 4-5
4.5 Remote Command Descriptions _______________________________________ 4-7
Configuring the SE4000
5.0 SE4000 Configuration Procedure ______________________________________ 5-1
5.1 Setting the Default Configuration ______________________________________ 5-2
5.1.1 Using the Front Panel to Set the Default Factory Configuration _____________ 5-2
5.1.2 Using a Remote Unit to Set the Default Configuration ____________________ 5-3
5.2.2 Configuring a Simple SCPC Setup Using the Remote Unit_________________ 5-4
Troubleshooting
6.0 Fault Reporting and Monitoring ________________________________________ 6-1
6.1 Status LED________________________________________________________ 6-1
6.2 Current Faults _____________________________________________________ 6-2
6.2.1 Viewing Current Faults on the Front Panel _____________________________ 6-2
6.2.2 Viewing Current Faults Using a Remote Device _________________________ 6-3
6.3 Fault History Log ___________________________________________________ 6-3
6.3.1 Viewing Fault History Log on the Front Panel ___________________________ 6-4
6.3.2 Viewing the Fault History Log Using a Remote Unit ______________________ 6-5
6.4 Fault Relay Monitoring _______________________________________________ 6-5
6.4.1 Viewing Fault Relay Log on the Front Panel ____________________________ 6-6
6.5 Initialization Self-Test Function ________________________________________ 6-7
6.6 Fault Summary_____________________________________________________ 6-7
6.7 Fault Summary____________________________________________________ 6-11