Radyne ComStream TIERNAN SE4000, Инструкция по установке и эксплуатации

Страница: 80 / 161

SE4000 MPEG-2 Contribution Encoder Using a Remote Unit
01-0934-401-B 4-15
SE4000 Remote Command Descriptions
Remote Command Parameter
Range
Factory
Default
Description
MC FPLOCK Locked Unlocked Used to query or set the state of the front panel.
If queried, responses are: unlocked = the front
panel is unlocked, operators can use the front
panel to configure, monitor, and control SE4000
operations; locked = front panel is locked and is
only available to monitor SE4000 operations.
If used to set the state of the front panel, only a
LOCKED parameter may be issued.
The front
panel or the MC FPPASSWD must be used to
unlock the unit.
For additional information on
locking and unlocking the front panel, refer to the
chapter on the front panel.
Front panel command equivalent:
Config>Control>FP Lock>State
MC GATEWAY
#.#.#.# Where # is a
decimal
number from 0
to 255
0.0.0.0 Sets the designated gateway in an IP network.
Front panel command equivalent:
Config>Comm>Network>IP Router
MC MAC - - Displays the unit’s Medium Access Control (MAC),
or network, address. The format for the returned
value is #:#:#:#:#:# where # represents a
hexadecimal number.
Front panel command equivalent:
Config>Comm>Network>TMA
MC SN - Displays the unit Serial Number
MC IP #.#.#.# Where # is a
decimal
number from 0
to 255
0.0.0.0 Sets the IP address.
Front panel command equivalent:
Config>Comm>Network>IP Addr
MC MASK #.#.#.# Where # is a
decimal
number from 0
to 255
225.225.0.
0
Sets the IP mask.
Front panel command equivalent:
Config>Comm>Network>IP Mask
MC PARITY N, O, E N Sets the parity for the RS-232 remote control port
configuration. Parameters are:
? N = No parity
? O = Odd parity
? E = Even parity
Front panel command equivalent:
Config>Comm>Serial>Parity