Radyne ComStream TIERNAN SE4000, Инструкция по установке и эксплуатации

Страница: 57 / 161

Using a Remote Unit SE4000 MPEG-2 Contribution Encoder
4-24 01-0934-401-B
Front Panel Menu Summary
Command Function Options/Response Format
Control>Serial Used to configure the remote control port.
Baud Rate Sets the asynchronous interface
baud rate for the remote port.
1200, 2400, 4800, 9600, 19200, 38400 bps
default: 38400 bps
Data Bits Sets the number of data bits for
the remote port.
7, 8
default: 8
Stop Bits Sets the number of stop bits for
the remote control port.
1, 2
default: 1
Parity none, even, odd
default: none
Flow Control Sets the remote control port flow
control.
? soft: software XON/XOFF (default)
? hard: hardware RTS/CTS
Control>Netwo
rk
set to enter the network address of the SE4000.
MAC address Query-only, displays the SE4000
network address.
text string
IP Address Sets the IP address. user defined
default: 0.0.0.0
IP Mask Query-only, displays the IP
mask.
This parameter can be set using
a remote terminal and the
appropriate remote command.
text string
default: 225.225.0.0
Gateway Query-only, displays the IP
router address.
This parameter can be set using
a remote terminal and the
appropriate remote command.
text string
default: 0.0.0.0
ControlClock>
DateTime
Used to set the date and time.
Date Sets the date.
If the date is entered incorrectly,
or an out-of-range value is
entered, the SE4000 will display
and continue to use the
previously set date.
dd/mm/yyyy
default: 00.00.0000
Time Sets the time
The hours are in a 24-hour
format and must be set from 00
to 23, where 00 is midnight and
23 is 11 PM. Both minutes and
seconds can be set from 00 to
59.
hh.mm.ss
default: 00:00:00
Control>Varian
t
Used to enter software keys to allow for field upgrades (for example – 4:2:2,
8PSK, and 16QAM are currently available as key driven field upgrades via front
panel key entry).
? 4:2:2 Chroma Key
? 40_140 freq. Range Key
? L band Key
? 8PSK Key
? 16QAM Key