Radyne ComStream TIERNAN SE4000, Инструкция по установке и эксплуатации

Страница: 72 / 161

SE4000 MPEG-2 Contribution Encoder Using a Remote Unit
01-0934-401-B 4-7
<mnemonic>.<designator> ?
For example: AE.A? Lists all commands associated with that mnemonic.
<mnemonic>.<designators> <instruction> ?
For example: AE.A BRP? Lists information available for that particular command,
including all valid parameters.
4.5 Remote Command Descriptions
All standard SE4000 remote commands are listed in alphabetical order in the following tables,
which provide the following information:
•
Remote commands and any command designators
•
Parameter values or value range
•
Factory default value
Description of the command, including parameter definitions, the front panel command
equivalent, and the SNMP command equivalent
Command designators and parameter values may be shown within
brackets < >; these brackets are not typed when issuing commands.
SE4000 Remote Command Descriptions
Remote Command Parameter
Range
Factory
Default
Description
AE.< port > BR
<port> is A or B
64, 80, 96,
112, 128, 160,
192, 224, 256,
320, 384 Kbps
256 Kbps Sets the audio compressed bit rate.
Note: Selecting a high audio compressed bit
rate will produce a high-quality audio signal
at the output audio device; however, a high
audio compressed bit rate reduces the total
transport stream bit rate available for the
video signal. Select an audio compressed bit
rate that meets the audio requirements while
allowing sufficient bandwidth to meet the
video requirements.
Front panel command equivalent:
Main>Service>Audio>Data Rate