Radyne ComStream TIERNAN SE4000, Инструкция по установке и эксплуатации

Страница: 148 / 161

SE4000 MPEG-2 Contribution Encoder Table Top/Rack Mount Installation Instructions
01-0934-401-B E
-3
4.
Ensure that the installation provides the minimum required air flow clearances at the
sides and rear of the unit.
E.4 Safety Precautions
If rack-mounted units are installed in a closed or multi-unit rack, consider the following items;
further evaluation by a Certifying Agency may be required.
E.4.1 Ambient Temperature
The ambient temperature within the rack may be greater than the room’s ambient temperature.
When installing the unit, ensure that the required air flow for safe operation is provided. Never
restrict air flow through the unit’s fans or vents.
E.4.2 Rack Stability
During installation, consider weight distribution on the rack; hazardous stability conditions may
arise if units are loaded into the rack unevenly.
E.4.3 Input Supply
Overloading of supply circuits could impact over-current protection and supply wiring. To ensure
that supply circuits are not overloaded review the nameplate ratings. Connect the unit only to a
properly rated supply circuit.
E.4.4 Grounding
Reliable grounding of this equipment must be maintained. Pay particular attention to supply
connections when connecting to power strips, rather than direct connections to the branch circuit.
E.4.5 Radiation Performance
This unit complies with FDA radiation performance standards, 21CFR, Sub-chapter J.