Radyne ComStream TIERNAN SE4000, Инструкция по установке и эксплуатации

Страница: 69 / 161

Using a Remote Unit SE4000 MPEG-2 Contribution Encoder
4-4 01-0934-401-B
4.2.2 Command Elements
All commands consists of a command mnemonic, which is followed by a space, and the
command instruction.
The SE4000 uses the following command mnemonics to group various commands:
•
TBD
Execute commands have an additional parameter which follows the command instruction.
4.3 Issuing Remote Commands
To issue a command from a remote unit, type the command at the remote prompt (>) with the
appropriate parameter, and then press the ENTER key. The following syntax is used:
<command> <parameter>
where:
•
<command>
consists of its mnemonic and the instruction; ensure that the command is
typed correctly and includes spaces and underscore (_) and period (.) characters as
appropriate
•
There must be one space between the command and the parameter. A space is typed by
pressing the Space Bar key.
•
<parameter>
is the value pertaining to the command. Parameters can be numeric or
alphanumeric. No spaces should be typed after the parameter; doing so will result in an
error.
The SE4000 performs the required function and displays the prompt (>) when it is ready to accept
another command.
For example, to set the remote port baud rate to 1200 bps, issue the command
MC BAUD 1200
and press Enter. In this example:
•
The command mnemonic is
MC
followed by a space
•
The command instruction is
BAUD
followed by a space
•
The parameter is
1200.