PI MS249E Скачать руководство пользователя страница 232

Страница: 232 / 279

8 GCS Commands

226

Version: 1.2.1

MS249E

C-863.12 Mercury Controller

-1068

PI_PROFILE_GENERATOR_OUT_OF_LIMITS ProfileGenerator: Generated

profile exceeds limits of one
or both axes

-1069

PI_PROFILE_GENERATOR_UNKNOWN_PAR
AMETER

ProfileGenerator: Unknown
parameter ID in Set/Get
Parameter command

-1070

PI_PROFILE_GENERATOR_PAR_OUT_OF_R
ANGE

ProfileGenerator: Parameter
out of allowed range

-1071

PI_EXT_PROFILE_OUT_OF_MEMORY

User profile mode: out of
memory

-1072

PI_EXT_PROFILE_WRONG_CLUSTER

User profile mode: cluster is
not assigned to this axis

-1073

PI_UNKNOWN_CLUSTER_IDENTIFIER

Unknown cluster identifier

-1074

PI_INVALID_DEVICE_DRIVER_VERSION

The installed device driver
doesn't match the required
version. Please refer to the
documentation to determine
the required device driver
version.

-1075

PI_INVALID_LIBRARY_VERSION

The library used doesn't
match the required version.
Please refer to the
documentation to determine
the required library version.

-1076

PI_INTERFACE_LOCKED

The interface is currently
locked by another function.
Please try again later.

-1077

PI_PARAM_DAT_FILE_INVALID_VERSION

Version of parameter DAT file
does not match the required
version. Current files are
available at www.pi.ws.

-1078

PI_CANNOT_WRITE_TO_PARAM_DAT_FIL
E

Cannot write to parameter
DAT file to store user defined
stage type.

-1079

PI_CANNOT_CREATE_PARAM_DAT_FILE

Cannot create parameter DAT
file to store user defined
stage type.

-1080

PI_PARAM_DAT_FILE_INVALID_REVISION Parameter DAT file does not

have correct revision.

-1081

PI_USERSTAGES_DAT_FILE_INVALID_REVIS
ION

User stages DAT file does not
have correct revision.

-1082

PI_SOFTWARE_TIMEOUT

Timeout Error. Some lengthy
operation did not finish
within expected time.

Содержание MS249E
























































































































































































































































































Результаты поиска

Содержание MS249E

Отзывы:

PI MS249E, Руководство пользователя, Страница: 232 / 279

Результаты поиска

Содержание MS249E

Отзывы: