2 Safety
C-863.12 Mercury Controller
MS249E
Version: 1.2.1
5
2.1
Intended Use
The C-863.12 is a laboratory device as defined by DIN EN 61010. It is intended for indoor use
and use in an environment that is free of dirt, oil, and lubricants.
In accordance with its design, the C-863.12 is intended for operating PI positioners equipped
with DC motors or integrated PWM motor drivers.
The C-863.12 is intended for closed-loop operation with incremental position sensors. In
addition, it can read and process the reference point and limit switch signals from the
connected positioner.
The C-863.12 may only be used in compliance with the technical specifications and instructions
in this user manual. The user is responsible for process validation.
2.2
General Safety Instructions
The C-863.12 is built according to state-of-the-art technology and recognized safety standards.
Improper use can result in personal injury and/or damage to the C-863.12.
➢
Use the C-863.12 for its intended purpose only, and only when it is in perfect technical
condition.
➢
Read the user manual.
➢
Eliminate any malfunctions that may affect safety immediately.
The operator is responsible for the correct installation and operation of the C-863.12.
➢
Install the C-863.12 near the power supply so that the power plug can be quickly and
easily disconnected from the mains.
➢
Use the components supplied (power supply and power cord) to connect the C-863.12
to the power supply.
➢
If one of the components supplied for connecting to the power supply has to be
replaced, use a sufficiently rated component.
2
Safety