Philips IntelliVue Series, Инструкция по установке и обслуживанию

Страница: 409 / 522

Troubleshooting
Maintenance, Troubleshooting, and Repair
7-123
Step 4. Select
Advanced Options
and press
Enter
to display its menu.
Step 5. Select
Erase Non-volatile Memory
and press
Enter
twice.
Step 6. Select
Yes, Select to Erase
and press
Enter.
When prompted that
Power Cycle Required!
:
Step 7. Reboot the Server by turning the power Off and then On .
Step 8. Repeat Step 1 and Step 2 to re-enter the
ROM Based Setup Utility
.
Step 9. Select
System Options
and press
Enter
to display its menu.
Step 10. Change settings as follows:
– Select NUMLOCK Power-on State and press Enter twice to display its
options: Change its setting to On using the arrow key and press Enter.
– Select Embedded NIC PXE Support and press Enter to display its options:
Change its setting to Disabled using the arrow key and press Enter.
Step 11. Press the keyboard
Esc
key to return to the
ROM Based Setup Utility
window.
Step 12. Select
PCI Devices
and press
Enter
to display its menu.
Step 13. Change settings as follows:
– Select PCI Embedded Compaq 64-Bit Dual Wide Ultra3 SCSI Adapter
Port 1 and press Enter to display its options:
Change its setting to Disabled using the arrow key and press Enter.
– Select PCI Embedded Compaq 64-Bit Dual Wide Ultra3 SCSI Adapter
Port 2 and press Enter to display its options:
Change its setting to Disabled using the arrow key and press Enter.
Step 14. Press the keyboard
Esc
key to return to the
ROM Based Setup Utility
window.
Step 15. Select
Boot Controller Order
and press
Enter
to display its menu.
Step 16. Select
Ctlr:3 PCI Slot 1 HP Smart Array 641 Controller
and press
Enter
.
Step 17. Select
Controller Order 1
and press
Enter
.
Step 18. Verify that
Ctlr1 PPCI Slot 1
is
HP Smart Array 641 Controller
.
Step 19. Press the keyboard
Esc
key to return to the
ROM Based Setup Utility
window.
Step 20. Select
Date and Time
and press
Enter
to display its window.
Step 21. Set the
Date and Time
to present values using the number keys and press
Enter
.
Step 22. Select
Advanced Options
and press
Enter
to display its menu.
Step 23. Change settings as follows:
– Select POST Speed Up and press Enter to display its options:
Change its setting to Disabled using the arrow key and press Enter.
– Select Wake-On LAN and press Enter twice to display its options:
Change its setting to Disabled using the arrow key and press Enter.
Step 24. Press the keyboard
Esc
key twice to return to the
ROM Based Setup Utility.