Philips IntelliVue Series, Инструкция по установке и обслуживанию

Страница: 425 / 522

Troubleshooting
Maintenance, Troubleshooting, and Repair
7-139
For a parallel connected printer: lj_lpt1
For a Network connected printer, use the
Printer Icon name from Table 6-2 for the
IP Address entered:
lj_001 to lj_008
• Select if it will be the default printer.
Step 11. In the Printer Sharing window, select Do not share this printer .
Step 12. In the Print Test Page window, select Yes to print a test page. A
Printer Icon
dialog box will appear and the LaserJet printer will print a
Windows Printer Test
Page
. If this page prints correctly, click
Yes
in the dialog box.
• Did the test page print correctly? Yes
Step 13. Review the printer information in the last window and click Finish to complete
the configuration.
Step 14. Double click on the
Printer Icon
to access the
Printer Icon
window.
Step 15. Click on
Printer
in the upper row menu.
Step 16. Click
Properties
in the
Printer
menu to bring up the
Printer Icon Properties
window.
Step 17. Click on the
Advanced
tab in the
Properties
window. Make the following
selections in the window:
• Always available
• Priority: 1
• Spool print documents so program finishes printing faster
• Start printing after last page is spooled
• Print spooled documents first
Step 18. Click on the
Print Processor
button to bring up the
Print Processor
window.
Step 19. Under
Default Datatype
, select
RAW
and then
OK
to return to the
Properties
window.
Step 20. Click on
Printing Defaults
and then
Paper/Quality
tab and
Advanced
to
bring up the
Advanced Options
window. Configure the following settings:
Paper Size <Letter>
Note
For users of A4 paper, set
Paper Size
to
<A4>
.
Print Quality: <300 x 300 dots per inch>
True Type Font <Substitute with Device Font>
Halftoning <Auto Select>
Print Optimizations <Disabled>
EconoMode <EconoMode - Off>
Graphics Mode <Raster>
Step 21. Click OK to return to the Printer Icon window.