Philips IntelliVue Series, Инструкция по установке и обслуживанию

Страница: 262 / 522

Configuration
6-36
Software Installation & Configuration
Note For Database Server networks and Local Database Information Centers, all the beds that are
added to the system are displayed. The bed labels are unique across all units.
Buttons to the right of the Labels field are for adding, changing, and removing beds from the
list:
Note
Fields in the
Add new labels
window are:
Note Some non-alpha numeric characters are not compatible with the SDN. If an invalid character is
entered, the following message appears:
Label Type Selects the type of label to assign -- Bed , Telemetry , or Monitor . Clicking in the circle
preceding the desired Label Type selects it. Each selection modifies the Equipment Setup
window for that selection.
Note— Text must be entered when adding Labels. Adding spaces without text is not allowed. If
spaces used without text, the system must be reinitialized.
• Selecting Bed as the Label Type displays a window with a Bed Labels field. This
window is used to set up a series of bed labels for assigning to monitoring equipment for
each clinical unit. Columns in the Bed Labels field are:
– Bed Label lists the identifying labels to be assigned to patient monitoring equipment for
each clinical unit, e.g.
Bed1
,
Bed2
, ....
–
Unit
is the name of the
Clinical Unit
where the monitoring equipment is located,
Unit_1
,
Unit_2 , .... For networked Information Centers, clinical Unit names are given in the
Network Configuration window.
– Selecting Telemetry as the Label Type displays a window with an Equipment Labels
for Telemetry field. This window is used to set up labels for telemetry monitors to be
used in the selected unit. The column in the Equipment Labels for Telemetry field is
Equipment Label , which lists the identifying labels to be assigned to telemetry monitors,
e.g.
Tel1
,
Tel2
, ....
• Selecting Monitor as the Label Type displays a window with a Monitor Labels field.
This window is used to set up a series of labels for assigning to patient monitors connected
to the network. The
column in the Monitor Labels field is Monitor Label , which lists the
identifying labels to be assigned to patient monitors, e.g. Mon1 , Mon2 ,....
Note— When adding new equipment (e.g. IntelliVue Patient Monitors) to an existing system in
Flex mode, you must add an additional label for each bedside Monitor added. This additional
label is required in order to enable the “Setup equipment only” option when setting up these new
monitors.
Button Description
Add Add new labels window is for adding labels to the list.
Button Description
Prefix Type in a prefix (up to 5 characters) for the label, e.g. Bed for beds, Tel for telemetry monitors,
or Mon for bedside monitors